The current "inbound" flag is used for two purposes: To define the actual
direction of the SA, but also to determine the operation used for SA
installation. If an SPI has been allocated, an update operation is required
instead of an add.
While the inbound flag normally defines the kind of operation required, this
is not necessarily true in all cases. On the HA passive node, we install inbound
SAs without prior SPI allocation.
While this change results in the correct add/update flag during installation,
it exchanges all other values in the child_sa->install() call. We should pass
the correct flag, but determine the add/update flag by other means.
This reverts commit e722ee5d.
This makes these CA certificates independent from the purge issued by reread
commands. Certificates loaded by CA sections can be removed through ipsec.conf
update/reread, while CA certificates loaded implicitly from ipsec.d/cacerts
can individually be reread using ipsec rereadcacerts.
Referencing $(srcdir) in the gemspec is not really an option, as "gem build"
includes the full path in the gem, so we need to build in $(srcdir). As there
does not seem to be a way to control the output of "gem build", we manually
move the gem to $(builddir) in OOT builds.
The inbound flag is used to determine if we have to install an update or a new
SA in the kernel. As we do not have allocated SPIs and therefore can't update
an existing SA in the HA plugin, always set the flag to FALSE.
Before 698ed656 we had extra logic for that case, but handling it directly in
the HA plugin is simpler.
Currently supports transport mode connections using IPv4 only, and requires
a unique mark configured on the connection.
To select the correct outbound SA when multiple connections match (i.e.
multiple peers connected from the same IP address / NAT router) marks must be
configured. This mark should usually be unique, which can be configured in
ipsec.conf using mark=0xffffffff.
The plugin inserts CONNMARK netfilter target rules: Any peer-initiated flow
is tagged with the assigned mark as connmark. On the return path, the mark
gets restored from the conntrack entry to select the correct outbound SA.
As with other configuration backends, XAuth is activated with a two round
client authentication using pubkey and xauth. In load-tester, this is configured
with initiator_auth=pubkey|xauth.
Fixes#835.
With make-before-break IKEv2 re-authentication, virtual IP addresses must be
assigned overlapping to the same peer. With the remote IKE address, the backend
can detect re-authentication attempts by comparing the remote host address and
port. This allows proper reassignment of the virtual IP if it is re-requested.
This change removes the mem-pool.reassign_online option, as it is obsolete now.
IPs get automatically reassigned if a peer re-requests the same address, and
additionally connects from the same address and port.
While it has some tests that we don't directly cover with the new unit tests,
most of them require special infrastructure and therefore have not been used
for a long time.
As we now use the same reqid for multiple CHILD_SAs with the same selectors,
having marks based on the reqid makes not that much sense anymore. Instead we
use unique marks that use a custom identifier. This identifier is reused during
rekeying, keeping the marks constant for any rule relying on it (for example
installed by updown).
This also simplifies handling of reqid allocation, as we do not have to query
the marks that is not yet assigned for an unknown reqid.
While we can handle the first selector only in BEET mode in kernel-netlink,
passing the full list gives the backend more flexibility how to handle this
information.
The reqid is not strictly required, as we set the reqid with the update
call when installing the negotiated SA.
If we don't need a reqid at this stage, we can later allocate the reqid in
the kernel backend once the SA parameters have been fully negotaited. This
allows us to assign the same reqid for the same selectors to avoid conflicts
on backends this is necessary.
When rekey_child_sa is called while enumerating the children of an IKE_SA, and
the child to be rekeyed is redundant a QUICK_DELETE task is queued instead of a
QUICK_MODE task. This alters the IKE_SA's list of children (ike_sa_t::child_sas)
invalidating the current element of the child_sa_enumerator. The enumerate
function of linked_list_t will then advance to an element with unpredictable
contents most likely resulting in an segmentation violation. A similar behavior
should be observed when delete_child_sa is called.
This patch creates a list of protocol/spi values while holding the
child_sa_enumerator and performs the rekeying (deletion of redundant) chlidren
after releasing the enumerator.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
iOS and Mac OS X clients establish individual IPsec SAs for the traffic
selectors received in Split-Include attributes (might have been different
in earlier releases). If we return 0.0.0.0/0 as TSr that either results
in a bunch of Quick Mode exchanges (for each TS), or with the latest
client releases an error notify (ATTRIBUTES_NOT_SUPPORTED).
We also can't install the IPsec SA with all configured subnets as that
would cause conflicts if the client later negotiates SAs for other subnets,
which iOS 8 does based on traffic to such subnets.
For Shrew and the Cisco client, which propose 0.0.0.0/0, we still need to
override the narrowed TS with 0.0.0.0/0, as they otherwise won't accept
the Quick Mode response. Likewise, we also have to narrow the TS before
installing the IPsec SAs and policies.
So we basically have to follow the client's proposal and only modify TSr
if we received 0.0.0.0/0. Since we don't get the original TS in the
narrow hook we handle the inbound QM messages and make note of IKE_SAs on
which we received a TSr of 0.0.0.0/0.
Fixes#737.
Martin Willi