added ikev2/ip-two-pools-mixed scenario

This commit is contained in:
Andreas Steffen
2009-03-03 17:10:52 +00:00
parent 49713c5396
commit 40a2331b09
13 changed files with 335 additions and 0 deletions
@@ -0,0 +1,9 @@
The hosts <b>alice</b> and <b>carol</b> set up a tunnel connection each to gateway <b>moon</b>.
Both hosts request a <b>virtual IP</b> via the IKEv2 configuration payload by using the
<b>leftsourceip=%config</b> parameter. Gateway <b>moon</b> assigns virtual IP
addresses from a simple pool defined by <b>rightsourceip=10.3.0.0/28</b> to hosts connecting
to the <b>eth0</b> (PH_IP_MOON) interface and virtual IP addresses from an SQLite-based pool
named <b>intpool</b> [10.4.0.1..10.4.1.244] to hosts connecting to the <b>eth1</b> (PH_IP_MOON1) interface.
<p>
Thus <b>carol</b> is assigned <b>PH_IP_CAROL1</b> whereas <b>alice</b> gets <b>10.4.0.1</b> and
both ping the gateway <b>moon</b>.
@@ -0,0 +1,17 @@
carol::ipsec status::home.*INSTALLED::YES
alice::ipsec status::home.*INSTALLED::YES
moon::ipsec status::ext.*ESTABLISHED.*carol@strongswan.org::YES
moon::ipsec status::int.*ESTABLISHED.*alice@strongswan.org::YES
moon::cat /var/log/daemon.log::adding virtual IP address pool.*ext.*10.3.0.0/28::YES
moon::ipsec leases ext::1/15, 1 online::YES
moon::ipsec leases ext 10.3.0.1::carol@strongswan.org::YES
moon::ipsec pool --status 2> /dev/null::intpool.*10.4.0.1.*10.4.1.244.*static.*1::YES
moon::ipsec pool --leases --filter pool=intpool,addr=10.4.0.1,id=alice@strongswan.org 2> /dev/null::online::YES
carol::cat /var/log/daemon.log::installing new virtual IP 10.3.0.1::YES
alice::cat /var/log/daemon.log::installing new virtual IP 10.4.0.1::YES
carol::ping -c 1 PH_IP_MOON::64 bytes from PH_IP_MOON: icmp_seq=1::YES
alice::ping -c 1 PH_IP_MOON1::64 bytes from PH_IP_MOON1: icmp_seq=1::YES
carol::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
carol::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
alice::tcpdump::IP alice.strongswan.org > moon1.strongswan.org: ESP::YES
alice::tcpdump::IP moon1.strongswan.org > alice.strongswan.org: ESP::YES
@@ -0,0 +1,78 @@
#!/sbin/runscript
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
opts="start stop reload"
depend() {
before net
need logger
}
start() {
ebegin "Starting firewall"
# default policy is DROP
/sbin/iptables -P INPUT DROP
/sbin/iptables -P OUTPUT DROP
/sbin/iptables -P FORWARD DROP
# allow ESP
iptables -A INPUT -i eth0 -p 50 -j ACCEPT
iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
# allow IKE
iptables -A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MOBIKE
iptables -A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow crl fetch from winnetou
iptables -A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
# allow ssh
iptables -A INPUT -p tcp --dport 22 -j ACCEPT
iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
eend $?
}
stop() {
ebegin "Stopping firewall"
for a in `cat /proc/net/ip_tables_names`; do
/sbin/iptables -F -t $a
/sbin/iptables -X -t $a
if [ $a == nat ]; then
/sbin/iptables -t nat -P PREROUTING ACCEPT
/sbin/iptables -t nat -P POSTROUTING ACCEPT
/sbin/iptables -t nat -P OUTPUT ACCEPT
elif [ $a == mangle ]; then
/sbin/iptables -t mangle -P PREROUTING ACCEPT
/sbin/iptables -t mangle -P INPUT ACCEPT
/sbin/iptables -t mangle -P FORWARD ACCEPT
/sbin/iptables -t mangle -P OUTPUT ACCEPT
/sbin/iptables -t mangle -P POSTROUTING ACCEPT
elif [ $a == filter ]; then
/sbin/iptables -t filter -P INPUT ACCEPT
/sbin/iptables -t filter -P FORWARD ACCEPT
/sbin/iptables -t filter -P OUTPUT ACCEPT
fi
done
eend $?
}
reload() {
ebegin "Flushing firewall"
for a in `cat /proc/net/ip_tables_names`; do
/sbin/iptables -F -t $a
/sbin/iptables -X -t $a
done;
eend $?
start
}
@@ -0,0 +1,23 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
crlcheckinterval=180
strictcrlpolicy=no
plutostart=no
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn home
left=%defaultroute
leftsourceip=%config
leftcert=aliceCert.pem
leftid=alice@strongswan.org
leftfirewall=yes
right=PH_IP_MOON1
rightid=@moon.strongswan.org
auto=add
@@ -0,0 +1,5 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = curl aes des sha1 sha2 md5 gmp random x509 pubkey hmac xcbc stroke kernel-netlink updown
}
@@ -0,0 +1,23 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
crlcheckinterval=180
strictcrlpolicy=no
plutostart=no
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
conn home
left=PH_IP_CAROL
leftsourceip=%config
leftcert=carolCert.pem
leftid=carol@strongswan.org
leftfirewall=yes
right=PH_IP_MOON
rightid=@moon.strongswan.org
auto=add
@@ -0,0 +1,5 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
load = curl aes des sha1 sha2 md5 gmp random x509 pubkey hmac xcbc stroke kernel-netlink updown
}
@@ -0,0 +1,91 @@
#!/sbin/runscript
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
opts="start stop reload"
depend() {
before net
need logger
}
start() {
ebegin "Starting firewall"
# enable IP forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward
# default policy is DROP
/sbin/iptables -P INPUT DROP
/sbin/iptables -P OUTPUT DROP
/sbin/iptables -P FORWARD DROP
# allow esp
iptables -A INPUT -i eth0 -p 50 -j ACCEPT
iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
iptables -A INPUT -i eth1 -p 50 -j ACCEPT
iptables -A OUTPUT -o eth1 -p 50 -j ACCEPT
# allow IKE
iptables -A INPUT -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
iptables -A INPUT -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
iptables -A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
# allow MobIKE
iptables -A INPUT -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
iptables -A INPUT -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
iptables -A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
# allow crl fetch from winnetou
iptables -A INPUT -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
iptables -A FORWARD -i eth0 -o eth1 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
iptables -A FORWARD -o eth0 -i eth1 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
# masquerade crl fetches to winnetou
iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -d PH_IP_WINNETOU -j MASQUERADE
# allow ssh
iptables -A INPUT -p tcp --dport 22 -j ACCEPT
iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
eend $?
}
stop() {
ebegin "Stopping firewall"
for a in `cat /proc/net/ip_tables_names`; do
/sbin/iptables -F -t $a
/sbin/iptables -X -t $a
if [ $a == nat ]; then
/sbin/iptables -t nat -P PREROUTING ACCEPT
/sbin/iptables -t nat -P POSTROUTING ACCEPT
/sbin/iptables -t nat -P OUTPUT ACCEPT
elif [ $a == mangle ]; then
/sbin/iptables -t mangle -P PREROUTING ACCEPT
/sbin/iptables -t mangle -P INPUT ACCEPT
/sbin/iptables -t mangle -P FORWARD ACCEPT
/sbin/iptables -t mangle -P OUTPUT ACCEPT
/sbin/iptables -t mangle -P POSTROUTING ACCEPT
elif [ $a == filter ]; then
/sbin/iptables -t filter -P INPUT ACCEPT
/sbin/iptables -t filter -P FORWARD ACCEPT
/sbin/iptables -t filter -P OUTPUT ACCEPT
fi
done
eend $?
}
reload() {
ebegin "Flushing firewall"
for a in `cat /proc/net/ip_tables_names`; do
/sbin/iptables -F -t $a
/sbin/iptables -X -t $a
done;
eend $?
start
}
@@ -0,0 +1,27 @@
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
crlcheckinterval=180
strictcrlpolicy=no
plutostart=no
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev2
leftcert=moonCert.pem
leftid=@moon.strongswan.org
leftfirewall=yes
right=%any
conn int
left=PH_IP_MOON1
rightsourceip=%intpool
auto=add
conn ext
left=PH_IP_MOON
rightsourceip=10.3.0.0/28
auto=add
@@ -0,0 +1,14 @@
# /etc/strongswan.conf - strongSwan configuration file
charon {
plugins {
sql {
database = sqlite:///etc/ipsec.d/ipsec.db
}
}
load = curl aes des sha1 sha2 md5 gmp random x509 pubkey hmac xcbc stroke sqlite sql kernel-netlink updown
}
pool {
load = sqlite
}
@@ -0,0 +1,9 @@
carol::ipsec stop
alice::ipsec stop
moon::ipsec stop
moon::/etc/init.d/iptables stop 2> /dev/null
carol::/etc/init.d/iptables stop 2> /dev/null
alice::/etc/init.d/iptables stop 2> /dev/null
moon::conntrack -F
moon::ipsec pool --del intpool 2> /dev/null
moon::rm /etc/ipsec.d/ipsec.*
@@ -0,0 +1,13 @@
moon::cat /etc/ipsec.d/tables.sql > /etc/ipsec.d/ipsec.sql
moon::cat /etc/ipsec.d/ipsec.sql | sqlite3 /etc/ipsec.d/ipsec.db
moon::ipsec pool --add intpool --start 10.4.0.1 --end 10.4.1.244 --timeout 0 2> /dev/null
moon::/etc/init.d/iptables start 2> /dev/null
carol::/etc/init.d/iptables start 2> /dev/null
alice::/etc/init.d/iptables start 2> /dev/null
carol::ipsec start
moon::ipsec start
alice::ipsec start
carol::sleep 2
carol::ipsec up home
alice::ipsec up home
alice::sleep 1
@@ -0,0 +1,21 @@
#!/bin/bash
#
# This configuration file provides information on the
# UML instances used for this test
# All UML instances that are required for this test
#
UMLHOSTS="alice moon carol winnetou"
# Corresponding block diagram
#
DIAGRAM="a-m-c-w.png"
# UML instances on which tcpdump is to be started
#
TCPDUMPHOSTS="alice carol"
# UML instances on which IPsec is started
# Used for IPsec logging purposes
#
IPSECHOSTS="alice moon carol"